When our teams visit customers on site, we quite often receive questions on how to store their GMA Garnet™ abrasives in the best possible way.
Before we talk about the proper handling and storage of your garnet products, it is important to note that exposing your garnet supplies to moisture should be avoided as much as possible.
Wet abrasives get compacted and harden in the hopper. When you then feed it to the cutting head, it may stick to the feed hoses or comes out in lumps and risk clogging the feed regulator.
That’s why our 25kg (55lbs) paper and 1,000kg (2200lbs) and 2,000kg (4400lbs) polypropylene bulk bag/big bag packaging come with plastic inner liners.
Useful tips on garnet storage
First and foremost, train your employees on the proper handling of garnet abrasive sand best work practices.
Managing your abrasives well not only maximises your resources but also ensures a trouble-free and interrupted cutting operation.
- Store GMA Garnet™ abrasives indoors and in a dry place. Abrasives stored in polypropylene bags must be kept out of direct sunlight to avoid UV degradation.
- Keep the packaging tightly closed and in a well-ventilated place without large temperature swings to prevent condensation.
- Place paper and bulk bags on pallets and not directly on the floor. Be aware of opened bags near the waterjet cutting machine as it can be exposed to water splashes from the machine.
- Identify a safe and low-traffic storage location in your warehouse to avoid potential damages to the bags.
Another point to note: We recommend that you check the goods received for any damages on the packaging that may have occurred during the delivery.