Versatility is one of the main attractions to waterjet cutting and why they have become so popular in the manufacturing industry. Much like manufacturing operations, there is no “one size fits all” anymore, as situations change from one day to the next. From cutting ferrous to non-ferrous metals such as carbon steel, stainless steel, aluminum, alloy, high nickel materials and even AR (abrasion resistant) plate. Waterjet machines are also very common in stone and tile shops, and glass cutting as well. They can offer a high precision cut, for both edge quality and any ornate or intricate cutouts.
Of course, with any waterjet cutting operation that requires abrasive, the garnet you use can have a significant impact. That is where GMA separates itself from the competition, and why GMA Garnet™ is the predominant choice for waterjet machines in the U.S. and around the world.
For many years, 80 mesh alluvial garnet, such as our
ClassicCut™ 80 has been the industry standard for most applications. And to this day, it has stood the test of time and is the clear choice for more waterjet machines in the U.S. than any other garnet. But when it comes to cutting other materials, in some cases, there can be better options.
For example, some of our stainless steel service centers that process several thousand tons of stainless plate a year; many have chosen to use our Procut™ 60. It is coarser and is one of our engineered blends that we developed after many hours of Research & Development that included different blending ratios and real world cutting, (both in-house and at customers facilities). When test cutting 1.5” thick 304 SS plates, the average cutting speed is 20% faster than the regular 60 mesh alluvial garnet, all while achieving the same edge quality.
Time is money, and if we can help our customers increase their performance, they become more profitable in the process. It can be used for both - a finish cut, or in some cases where speed is more important, it can also be used for a rough cut as a first operation. Unlike plasma or oxy fuel, you won’t have any heat affected zones. And when cutting medium or higher carbon steel such as 1045, you won’t have to stress relieve or anneal after a waterjet cut; as you do after flame cutting.
In addition to the coarser
Procut™ 60, we also produce several finer options; such as
ClassicCut™ 120 mesh and our
MicroCut™ 220. These finer grades can be used to cut metal as well but these are very popular in the glass industry. By nature, glass is fragile, so it is imperative that you maintain consistency when cutting with high pressure waterjets. If the abrasive is too coarse, it can crack the glass. If the abrasive is too fine or powdery, it will not flow properly and can cause clogs in the cutting head.